GenCore Power Protection Insights

Blog

One Question Decides the 1000 kW Set: Cummins QSK vs Caterpillar C32 for a Container Terminal

Posted on Wednesday 17th of June 2026 by Rebecca Sloan

Cummins vs Caterpillar generator — A container terminal's reefer yard and ship-to-shore crane backup land in the ~1000 kW band — where the Cummins QSK family meets the Caterpillar C32 (830–1000 kW). [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

The 700 kW Pump Station Genset, Stripped to Its Constraints: Cummins QSK vs Perkins 4000

Posted on Wednesday 17th of June 2026 by Rebecca Sloan

Cummins vs Perkins generator — A stormwater lift station does nothing for weeks, then has to swallow its entire demand inside a thunderstorm. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Cummins vs Caterpillar Generator: Sizing by Real Watts

Posted on Wednesday 17th of June 2026 by Rebecca Sloan

Cummins vs Caterpillar generator — You're staring at a spec sheet for a 500 kW standby generator. But that number—like most published ratings—is a mythical beast. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Where a 750 kW Genset Breaks First: Cummins QSK vs Perkins 4000 in a Cold-Storage Plant

Posted on Wednesday 17th of June 2026 by Rebecca Sloan

Cummins vs Perkins generator — A frozen-food distribution centre rarely loses power gracefully. When the utility drops, three ammonia compressor banks, the dock-door defrost circuits, and the battery-room ventilation all want to come back… [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Most 'High AC Voltage Fault' Alarms in Cummins Generators Aren't What You Think

Posted on Wednesday 17th of June 2026 by Rebecca Sloan

A quality inspector argues that the vast majority of 'high AC voltage fault' alarms on Cummins generators are preventable with better upfront verification, sharing real-world examples and a practical checklist. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Three Generator Mistakes I Made (And How to Avoid Them With TCO Thinking)

Posted on Wednesday 17th of June 2026 by Rebecca Sloan

A field technician shares real-world mistakes about Cummins generator selection, fuel pump specs, and alternator diagnostics—plus how to use total cost of ownership (TCO) to make better decisions. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

100 kW vs 120 kW Cummins Backup Generators: What I Learned From $12,000 Worth of Mistakes

Posted on Tuesday 16th of June 2026 by Rebecca Sloan

A real-world comparison of 100 kW and 120 kW Cummins generators, plus critical maintenance traps I fell into — air filter direction, fuel pump signs, and universal battery chargers. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Why I Switched to Cummins Generator: A Purchasing Manager’s Story on Quality & Reliability

Posted on Tuesday 16th of June 2026 by Rebecca Sloan

Real experience from an admin buyer who learned the hard way why Cummins generator quality matters for B2B operations. Includes tips on resetting Cummins Onan 6500, dual fuel considerations, and lessons on brand perception. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Why Your Cummins Generator Spec Sheet Is Lying to You (And How to Read It Right)

Posted on Sunday 7th of June 2026 by Rebecca Sloan

A quality inspector reveals the most overlooked specs on a Cummins generator datasheet and why trusting the kW rating alone can cost you thousands. Based on real-world audit experience across 200+ units annually. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Choosing the Right Cummins Generator: A Quality Inspector's Guide to Matching Power, Location, and Maintenance

Posted on Sunday 7th of June 2026 by Rebecca Sloan

A practical, scenario-based guide to selecting Cummins generators (550 kW in Florida, 1000 kW diesel, etc.) and maintaining them, written from the perspective of a quality compliance manager. [...]

Continue Reading →

Posted in Blog

Leave a comment