GenCore Power Protection Insights

Blog

I Think Mid-Market Buyers Are Making a Mistake: Why I Won’t Spec a 450 kW Cummins Generator at 480V Without a Full Load Bank Test

Posted on Monday 22nd of June 2026 by Jane Smith

A quality inspector argues that mid-market buyers undervalue proper load bank testing for 480V Cummins generators, using real-world failures and data to make the case. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

The $4,000 Fuel Pump Mistake That Almost Killed Our Commissioning Deadline

Posted on Thursday 18th of June 2026 by Jane Smith

A field technician breaks down the real dangers of misdiagnosing mechanical fuel pumps and check valves on Cummins RS20 and military generators, based on a costly 2023 error. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Why Your 400 kW Emergency Generator Might Fail When You Need It Most (And What I Learned From My $12,000 Mistake)

Posted on Thursday 18th of June 2026 by Jane Smith

A first-person account of costly oversights in specifying and maintaining Cummins diesel generators — covering fuel filtration, alternator testing, hidden costs, and the real reason backup power systems let you down. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

One Rule, Three Pumping Stations: Choosing Cummins QSK or KOHLER-SDMO D830 by What the Bus Must Do

Posted on Wednesday 17th of June 2026 by Jane Smith

Cummins vs Kohler-SDMO generator — A regional water authority was buying standby diesel for three different pump houses in the same procurement. The temptation was to standardise on one brand. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Cummins vs SDMO Generator: Efficiency You Can Actually Keep – The TCO Ledger

Posted on Wednesday 17th of June 2026 by Jane Smith

Cummins vs Kohler-SDMO generator — You buy a generator for power. You keep it for efficiency you can bank on – fuel consumed over years, rebuild intervals, controller upgrade paths, and the cost of every kilowatt-hour after the warranty lapses. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Three Mine-Dewatering Beliefs, Measured to Scale: Cummins QSK vs Caterpillar C32 at 700 kW

Posted on Wednesday 17th of June 2026 by Jane Smith

Cummins vs Caterpillar generator — A surface dewatering substation cannot let the pump shafts stall when the grid drops — a flooded sump climbs faster than a crew can re-prime it. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

“My Caterpillar Generator Sounds Like a Freight Train – But How Quiet Is the Cummins Feed?”

Posted on Wednesday 17th of June 2026 by Jane Smith

Cummins vs Caterpillar generator — “Heavy industrial generators like Caterpillar and Cummins are all unbearably loud – you just have to accept the noise and build a massive shelter. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Trading kW Against Risk: A Cummins QSK / Perkins 4000 Spend Map for a Grain Terminal

Posted on Wednesday 17th of June 2026 by Jane Smith

Cummins vs Perkins generator — A port grain terminal must keep its aeration fans and dust-suppression running through outages — a fire risk if it doesn't. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Cummins vs Perkins Generator: The Spec That Actually Fails First

Posted on Wednesday 17th of June 2026 by Jane Smith

Cummins vs Perkins generator — COMMON BELIEF “The engine wears out first.” That’s the reflexive answer when a generator dies after ten years of weekly exercise. [...]

Continue Reading →

Posted in Blog

Leave a comment

Blog

Four Things Plant Engineers Get Wrong About 700 kW Cummins and Perkins Sets

Posted on Wednesday 17th of June 2026 by Jane Smith

Cummins vs Perkins generator — An aggregates quarry needed standby for its primary crusher feed and weighbridge offices. The shortlist came down to a Cummins QSK-family set and a Perkins 4000-series set at the same ~700 kW. [...]

Continue Reading →

Posted in Blog

Leave a comment